MASONRY REPAIR MATERIALS
THORO SYSTEM
WATERPROOFING INC.
1850A Delmar Drive, Folcroft, PA 19032-1414
(610) 583-5502  -  FAX (610) 583-5514
Terms of Use
CONCRETE RENEW
Is a one-component, polymer-modified cementitious material for the resurfacing of existing
concrete. It is suitable for broom finishes and decorative trowel finishes on sidewalks, driveways,
steps and anywhere that has exposed concrete. Concrete Renew features a natural light gray
color that provides a uniform, like-new look to concrete surfaces.

           
Data Sheet                                      MSDS
CONCRETE RENEW
FINE
Is a one-component, polymer-modified cementitious material for the resurfacing of existing
concrete. It allows a variety of finishing options, including broom finishes and decorative trowel
finishes, on sidewalks, driveways, steps and anywhere that has exposed concrete. Concrete
Renew
Fine features a natural light gray color that provides a uniform finish to concrete surfaces.

           
Data Sheet                                      MSDS
EMACO 100
Is a two-component, polymer-modified, Portland cement based, multi-purpose repair mortar. Its
fast-setting formula allows foot traffic in 24 hours. Its high compressive strength provides
durable repairs with an excellent surface finish.

Data Sheet                       MSDS - Liquid                    MSDS - Powder
EMACO R 400
ARCHITECTURAL
Is lowslump, fast setting, Portland-cement based, multi-purpose smooth repair mortar for
detailed fine architectural work. It does not require the use of forms or multi-layered casting
techniques.

           
Data Sheet                                      MSDS
EMACO GP
Is a fast-setting, nonsag cement-based repair mortar for small repairs on vertical, horizontal,
and overhead surfaces.

           
Data Sheet                                      MSDS
EMACO PLUG
Is a cement-based water-stop mortar. It will stop running and seeping water through cracks in
concrete under hydrostatic pressure. It can also be used to provide a watertight seal in pipes,
tanks, manholes, and a variety of other locations.

          
 Data Sheet                                      MSDS
MAPECEM 101
Is a one-component, shrinkage-compensated, polymer-modified, cementitious mortar intended
for the renovation and topping of interior/exterior horizontal concrete surfaces. It is designed for
factory floor repair, loading docks, warehouse floors and other applications where severe wear
resistance and abrasion resistance are required. Use Mapecem 101 for renovation of concrete
structures such as tunnels, bridges, overpasses, industrial floors, warehouse floors, factory
floors and loading docks; new and existing concrete slabs; and the construction and repair of
monolithic toppings where fast drying is required.

           
Data Sheet                                      MSDS
MAPECEM 102
Is a one-component, shrinkage-compensated, polymer-modified, fast-setting cementitious
mortar intended for the renovation and topping of interior/exterior horizontal concrete surfaces.
It is used for renovation of horizontal concrete structures such as galleries, tunnels, bridges,
overpasses, factory floors, warehouse floors and loading docks; new and existing concrete
slabs; and the construction of floating or monolithic toppings where fast drying is required to
allow traffic within 3 to 4 hours.

           
Data Sheet                                      MSDS
MAPECEM 202
Is a two-component, shrinkage-compensated, polymer-modified, fast-setting cementitious mortar
intended for the renovation and topping of interior/exterior horizontal concrete surfaces. It is
suited for galleries, tunnels, bridges, overpasses, factory floors, warehouse floors and loading
docks; new and existing concrete slabs; and the construction of floating or monolithic toppings
where fast drying is required to allow traffic within 3 to 4 hours.

           
Data Sheet                                      MSDS
PLANIPATCH
Is an ultra fast-drying, self-curing, polymer-modified, cement-based patching compound that
rapidly develops high compressive strength. Use for smoothing, patching and filling cracks,
holes, voids and depressions in concrete and approved wood underlayments prior to the
installation of floor coverings. Floor coverings can be installed just 1 hour after application. Mix
with Planipatch Plus™ to use as an embossing leveler or patch over properly prepared vinyl
sheet goods, vinyl composition tile (VCT), cement terrazzo and residual cutback adhesive
surfaces .

           
Data Sheet                                      MSDS
PLANITOP 12
Is a one-component, shrinkage-compensated, cementitious, thixotropic, fiber-reinforced mortar
intended for the renovation of interior/exterior vertical and overhead concrete surfaces. Use it
for overhead structural concrete repairs and restoration up to a thickness of 2" (5 cm). Planitop
12 can be placed in large quantities in overhead applications and is suited for precast,
cast-in-place, post-tensioned and prestressed concrete repair.

           
Data Sheet                                      MSDS
PLANITOP 18
Is a one-component, shrinkage-compensated, fast-setting, cementitious repair mortar that is
suited for all interior/exterior horizontal concrete repairs, including bridge-deck overlays,
parking-garage floor repairs and various horizontal DOT concrete repairs.

           
Data Sheet                                      MSDS
PLANITOP 25
Is a two-component, shrinkage-compensated, cementitious, flowable resurfacing mortar with
corrosion inhibitor. Once mixed, the mortar is easily placed onto horizontal surfaces in
thicknesses of 1/4" to 1" (6 mm to 2,5 cm) per coat. Planitop 25 contains a high concentration of
synthetic polymer, which produces a dense, durable resurfacing mortar with outstanding
adhesion, flexural and compression strengths. It has very low permeability, offering high
resistance to freeze/thaw cycles and chloride ion penetration.

           
Data Sheet                                      MSDS
PLANITOP X
Is a one-component, shrinkage-compensated, fast-setting, polymer-modified, high-build
cementitious repair mortar with a corrosion inhibitor. It is suited for all interior/exterior vertical,
overhead and horizontal concrete applications, including precast/prestressed, tilt-up, post-
tensioned and cast-in-place concrete. Planitop X can be applied in thicknesses of featheredge
to 4" (0 to 10 cm) per lift. Planitop X is engineered with MAPEI's Easy Glide Technology™ for
ease of application and is light gray to match existing concrete surfaces.

           
Data Sheet                                      MSDS
PLANITOP XS
Is an extended-working-time variation of Planitop® X. Shrinkagecompensated, fiber-reinforced
and polymer-modified, Planitop® XS features Planitop® X ’s outstanding workability and
corrosion inhibitor. Ideal for use in a wide variety of vertical and overhead concrete repairs,
Planitop® XS can be applied in thicknesses of featheredge to 4" (0 to 10 cm) per lift. Planitop®
XS is engineered with MAPEI’s Easy Glide Technology™ for ease of application and is light gray
to match existing concrete surfaces.

           
Data Sheet                                      MSDS
QUICKPATCH
Is a versatile, fast-setting, cementitious material used for the patching of interior/exterior
concrete surfaces including concrete floors, driveways, sidewalks and concrete pads. Mapecem
Quickpatch features extraordinary ease of placement, with a variable water ratio and
outstanding workability. Light gray Mapecem Quickpatch can be applied from featheredge to 3”
(7,5 cm) for ramping or filling. That makes it ideal for restoring weathered, damaged concrete
surfaces to a uniform, superior wearing and better-than-new appearance. When used for
horizontal substrate repair before application of self-leveling underlayments, Mapecem
Quickpatch sets fast for easy and cost-efficient repairs, minimizing job-site turnaround time.

           
Data Sheet                                      MSDS
TILT FINISH
Is a versatile, fast-setting, polymer-modified material blending calcium aluminate and Portland
cement. Tilt Finish is ideal for producing a smooth finish on concrete surfaces including tilt wall,
poured-in-place concrete, masonry, pre-cast beams and columns. Tilt Finish features
extraordinary ease of placement, with a variable water ratio, extended pot life and outstanding
workability. Light gray Tilt Finish can be applied from featheredge, up to 1/2" (12 mm) in
confined areas and up to 1/8" (3 mm) over large surface areas. Ease of placement makes it
ideal for covering imperfections in concrete surfaces, providing a uniform, light gray
appearance, or a smooth surface before painting or application of coating.

           
Data Sheet                                      MSDS
WATERPLUG
Is a one-component, quick-setting, Portland-cement-based hydraulic repair mortar that instantly
stops running water through holes or cracks in concrete or masonry. It expands as it sets to lock
into place even under constant water pressure.

           
Data Sheet                                      MSDS